DW Mesh Belt Drier Machine
1. Dryer capacity: 60-300kg/h
2. Application: Food and vegetables
3. Thickness of raw material: <=60 mm
4. GMP
Principles:
1.12-60 stainless steel mesh and drawn by a transmission device and move inside the belt dryer.
2. The mesh belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the dryer process will fall into the material collector continuously.
3. The belt dryer is composed of several sections. For each section, the hot air is circulated separately.
4. The top and low circulation units can be freely equipped according to the user's requirements.
Applications:
1. Pieces strip and particles state materials with good ventilation.
2. Materials with high water contents and low dryer temperature, such as dewatering vegetable, herbal medicine
Features:
1. Fast drying speed, high evaporation capacity and good product quality.
2. The de-watered & filtered cake state paste material should be made into particles or strips before drying process.
3. The materials are uniformly distributed on the mesh
Drier Machine
1. Dryer capacity: 60-300kg/h
2. Application: Food and vegetables
3. Thickness of raw material: <=60 mm
4. GMP
Principles:
1.12-60 stainless steel mesh and drawn by a transmission device and move inside the belt dryer.
2. The mesh belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the dryer process will fall into the material collector continuously.
3. The belt dryer is composed of several sections. For each section, the hot air is circulated separately.
4. The top and low circulation units can be freely equipped according to the user's requirements.
Applications:
1. Pieces strip and particles state materials with good ventilation.
2. Materials with high water contents and low dryer temperature, such as dewatering vegetable, herbal medicine
Features:
1. Fast drying speed, high evaporation capacity and good product quality.
2. The de-watered & filtered cake state paste material should be made into particles or strips before drying process.
3. The materials are uniformly distributed on the mesh
Drier Machine
specification | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 | |
unit | 4 | 5 | 4 | 5 | 4 | 5 | |
Dryinglength(m) | 8 | 10 | 8 | 10 | 8 | 10 | |
Thickness of raw material(mm) | ≤60 | ||||||
Working tem | 50~140 | ||||||
Steam pressure(MPa) |
0.2~0.8 | ||||||
Consumption of steam(kg/h) | 120-300 | 150-375 | 150-375 | 170-470 | 180-500 | 225-600 | |
Drying time(h) | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | |
Drying capacity(kg/h) | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 | |
power(kw) | 11.4 | 13.6 | 11.4 | 13.6 | 14.7 | 15.8 | |
Dimention |
L(m) | 9.56 | 11.56 | 9.56 | 11.56 | 9.56 | 11.56 |
W(m) | 1.49 | 1.49 | 1.9 | 1.9 | 2.32 | 2.32 | |
H(m) | 2.3 | 2.3 | 2.4 | 2.4 | 2.5 | 2.5 | |
weight(kg) | 4500 | 5600 | 5300 | 6400 | 6200 | 7500 |